At Pictor Valves S.L., we manufacture our products in a wide range of materials, configurations, and finishes, adapting each solution to the specific requirements of every project.

Correct equipment selection depends on a thorough understanding of the actual service conditions and operating requirements. Our technical–commercial team is available to assist you in selecting the most suitable solution.

If you would like more information or advice

do not hesitate to contact us.

Filter products

Showing All Products

Range: Bolted bonnet

Type: Gate Valve

  • Design:
    • ASME B16.34: Class150 – 600 lbs. / NPS ½” – NPS 26”
    • EN 12516: PN 10 – PN 100 / DN 15 – DN 600
    • EN 12516: PN 2,5 – PN 4 / DN 400 – DN 1600
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Handwheel, bevel gear operator, pneumatic, electric, and other accessories
  • Applications/accessories: Pressure relief or pressure and temperature balancing accessories, Bypass, others. On request.

Range: Bolted bonnet

Type: Globe Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 150 – 600 lbs. / NPS ½” – NPS 18”
    • EN 12516: PN 10 – PN 100 / DN 15 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Handwheel, bevel gear operator, pneumatic, electric, and other accessories
  • Applications/Accessories:
    • On/off service shut-off
    • Throttling / control service

Range: Bolted bonnet

Type: Stop Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 150 – 600 lbs. / NPS ½” – NPS 18”
    • EN 12516: PN 10 – PN 100 / DN 15 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Handwheel, bevel gear operator, pneumatic, electric, and other accessories

Range: Bolted bonnet

Type: Swing Check Valve

  • Design:
    • ASME B16.34: Class 150 – 600 lbs. / NPS 2” – NPS 24”
    • EN 12516: PN 10 – PN 100 / DN 50 – DN 600
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Hydraulic shock absorbers, counterweights, pneumatic actuators

Range: Bolted bonnet

Type: Piston Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 150 – 600 lbs. / NPS ½” – PNS 18”
    • EN 12516: EN PN 10 – PN 160 / DN 15 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW

Range: Pressure seal

Type: Gate Valve

Commercial name: IronWall

  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS 1 1/ 2” – NPS 26”
    • EN 12516: PN 100 – PN 760 / DN 50 – DN 650
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Bevel gear reducer, pneumatic, electric, and other accessories.
  • Applications/accessories: Pressure relief or pressure and temperature balancing accessories, Bypass, others. On request.

Range: Pressure seal

Type: Globe Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS 3” – NPS 18”
    • EN 12516: PN 100 – PN 760 / DN 80 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Bevel gear reducer, pneumatic, electric, and other accessories.
  • Variants:
    • On/off service shut-off
    • Throttling / control service

Range: Pressure seal

Type: Stop Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS 3” – 18”
    • EN 12516: PN 100 – PN 760 / DN 80 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Bevel gear reducer, pneumatic, electric, and other accessories.

Range: Pressure seal

Type: Swing Check Valve

  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS 2” – NPS 26”
    • EN 12516: PN 100-PN 760 / DN 50 – DN 650
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW
  • Actuation: Hydraulic shock absorbers, counterweights, pneumatic actuators.

Range: Pressure seal

Type: Piston Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / de NPS 3” – PN 18”
    • EN 12516: PN 100 – PN 760 / DN 80 – DN 450
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: RF / BW

Range: Bonnetless

Type: Gate Valve

  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS ½” – NPS 2”
    • EN 12516: PN 100 – PN 760 / DN 15 – DN 50
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: SW / BW / RF
  • Actuation: Handwheel, bevel gear operator, pneumatic, electric, and other accessories

Range: Bonnetless

Type: Globe Valve

Commercial name: STOPPER

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS ½” – NPS 3”
    • EN 12516: PN 100 – PN 760 / DN 15 – DN 80
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: SW / BW / RF
  • Actuation: Handwheel, bevel gear operator, pneumatic, electric, and other accessories
  • Constructions and variants for special services:
    • On/off service shut-off
    • Throttling / control service
    • Tandems, steam hammer, and others.
    • Continuous blowdown / intermittent blowdown
    • Vents
    • Purges
    • Drains
    • Other configurations
  • Tools:
    • Repair tool kit

Range: Bonnetless

Type: Stop Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS ½” – NPS 3”
    • EN 12516: PN 100-PN 760 / DN 15 – DN 80
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: SW / BW / RF
  • Actuation: Flywheel, bevel gear reducer, pneumatic, electric, and other accessories.

Range: Bonnetless

Type: Piston Check Valve

  • Configurations: T, Y, 90º.
  • Design:
    • ASME B16.34: Class 600 – 4500 lbs. / NPS ½” – 3”
    • EN 12516: PN 100 – PN 760 / DN 15 – DN 80
  • Materials: Carbon steel, alloy steel, stainless steel, others.
  • End Connections: SW / BW / RF

Range: Special Design

Commercial name: MS4

The MS 4 is a proposal and a strategic commitment aimed at increasing productivity in hot salt processes.

The scope of the MS includes both salt storage and salt concentration processes.

The valve is designed to immediately reduce operating costs:

  • More Cv / Kv
  • Simplified construction
  • Improved automation
  • More cost-effective automation
  • Better sealing performance
  • Standardization of spare parts
  • Possibility of bi-directional operation
  • Simplified resistance map
  • Significantly lower maintenance costs

Range: Special Design

Commercial name: MDC

Control valve for massive dome discharge.

  • High capacity
  • Quick response
  • Safe operation
  • Precise control
  • Robust construction
  • Easy maintenance
  • Versatile in applications